Friends as we all know Samsung Galaxy 551 i.e GT-I5510 is a android phone which is below 10k , It has a good looking with stylish slider ,
But many of you facing problems in it such as slow speed , later response , every time force to close application or tired of to do factory reset .
I Highly Recommend You To Upgrade Your Android Phone To Android 2.3.6 Gingerbread .
Below are steps to update GT-I5510 :
Disclaimer: Droidangel shall not be held responsible if anything happens to your device by following this guide.You at your own risk. Flashing firmwares is for advance users only. This is a bit risky for beginners
Before you proceed always back-up all important data stored from the device. We are flashing firmware here, so it is better to be prepared better than sorry if something went wrong.
Ensure that the battery is fully charge, I fully recommend fully charge I already encountered a weak battery that shows 80% power but it suddenly shut downs, for it is already weak. So, make sure that your battery is completely 100% working. Power failure while flashing will brick your device in no time.
Use a PC/laptop runs in windows OS, make sure that the USB port is working.
Grab these files you'll need for flashing
Odin 4.42 (this version flash smoothly for it has an enhance mode support)
CALLISTO_v1.0.ops (This is the default OPS file for Galaxy I5510 that tells Odin you are going to flash the right device.
Driver (only needed if you haven't installed Kies on your PC)
Stock ROMs ( I used the Czech firmware in this guide)
Hungary
firmware info:
I5510XWKPH - VDH
PDA: I5510XWKPH
CSC: I5510VDHKP3
Phone: I5510XWKP1
Stock ROM Download :GT-I5510_VDH_I5510XWKPH_I5510VDHKP3
Czech Republic
firmware info:
I5510XWKPH - XEZ
PDA: I5510XWKPH
CSC: I5510XEZKP2
Phone: I5510XWKP1
Stock ROM Download: GT-I5510_XEZ_I5510XWKPH_I5510XEZKP2
links via sammobile.com pulled from Samsung Kies server.
Password - samfirmware.com
1. Extract the file after download.
2. Run Odin
3. Click on the OPS button then select and load the CALLISTO_v1.0.ops
4. Tick on 'One Package' checkbox, then tick on the 'One Package' button on the bottom of Odin.
Now find the extracted I5510XWKPH_I5510XEZKP2_I5510XWKP1_HOME.tar.md5 and load it.
Wait a couple of seconds for it will checking out the md5 checksum for possible errors or incorrect.
5. Set the Galaxy 551 into "Download Mode" turn it OFF, then Press and hold the 'Q key and Power key" simultaneously. You will then see a downloading screen.
6. Connect the phone to PC , the ID:COM in Odin will turn to yellow if the device is already detected.
see the picture below. If Odin then recognize the phone, hit the "START" button to begin flashing.
DO NOT TOUCH or INTERRUPT the phone while the flashing is in progress. Wait until it completely finishes.
8. You will then see a word 'PASS" once its successfully finishes installing the firmware. The device will then reboot. Then unplug it from PC/laptop.
Do full factory reset, this is useful if you'll experience bootloops after flashing. Master reset by code *2767*3855# or via recovery mode pressing the "T key and Power key" will get you in recovery mode just scroll down to Wipe Data/Factory reset.
How to change to another CSC settings. This guide is originally created by skilledchaos, you can also visit his blog athttp://galaxy551.wordpress.com/ to learn more on how to tweak your Galaxy 551 like rooting installing CWM and other stuff.
1. Flash the file GT-I5510_CSC-xxxxxx.tar.md5 via Odin 4.xx
2. You may want to control the result of your flash by calling *#1234# and looking at line 3
3. Call *#06# to find out your device's IMEI and note it
4. Call *#272*IMEI# (instead of IMEI type the result of step 3)
5. Select your favourite language / area, e.g.:
CPW => English ~ UK (CPW) => QWERTY (with GBP pressing Alt+F)
DBT => German ~ Germany => QWERTZ (with EUR pressing Alt+F)
ITV => Italian ~ Italy => QWERTY (with GBP pressing Alt+F)
XEF => French ~ France => AZERTY (with EUR pressing Alt+F)
XEO => Polish ~ Poland => QWERTY (with GBP pressing Alt+F)
XEU => Engish ~ UK (Open) => QWERTY (with GBP pressing Alt+F)
NOTE: If you change the CSC settings, your device will be resetted! Therefore backup your personal data! Your microSD card's content will not be harmed.
6. Don't forget to control the language settings for Swype
7. You may delete all folders of languages you aren't interested in from the system partition (go to /system/csc) to free up valuable space
8. You may also delete T9 support for all languages you aren't interested in from the system partition (go to /system/T9DB) to free up valuable space
But many of you facing problems in it such as slow speed , later response , every time force to close application or tired of to do factory reset .
I Highly Recommend You To Upgrade Your Android Phone To Android 2.3.6 Gingerbread .
Below are steps to update GT-I5510 :
Disclaimer: Droidangel shall not be held responsible if anything happens to your device by following this guide.You at your own risk. Flashing firmwares is for advance users only. This is a bit risky for beginners
Before you proceed always back-up all important data stored from the device. We are flashing firmware here, so it is better to be prepared better than sorry if something went wrong.
Ensure that the battery is fully charge, I fully recommend fully charge I already encountered a weak battery that shows 80% power but it suddenly shut downs, for it is already weak. So, make sure that your battery is completely 100% working. Power failure while flashing will brick your device in no time.
Use a PC/laptop runs in windows OS, make sure that the USB port is working.
Grab these files you'll need for flashing
Odin 4.42 (this version flash smoothly for it has an enhance mode support)
CALLISTO_v1.0.ops (This is the default OPS file for Galaxy I5510 that tells Odin you are going to flash the right device.
Driver (only needed if you haven't installed Kies on your PC)
Stock ROMs ( I used the Czech firmware in this guide)
Hungary
firmware info:
I5510XWKPH - VDH
PDA: I5510XWKPH
CSC: I5510VDHKP3
Phone: I5510XWKP1
Stock ROM Download :GT-I5510_VDH_I5510XWKPH_I5510VDHKP3
Czech Republic
firmware info:
I5510XWKPH - XEZ
PDA: I5510XWKPH
CSC: I5510XEZKP2
Phone: I5510XWKP1
Stock ROM Download: GT-I5510_XEZ_I5510XWKPH_I5510XEZKP2
links via sammobile.com pulled from Samsung Kies server.
Password - samfirmware.com
1. Extract the file after download.
2. Run Odin
3. Click on the OPS button then select and load the CALLISTO_v1.0.ops
4. Tick on 'One Package' checkbox, then tick on the 'One Package' button on the bottom of Odin.
Now find the extracted I5510XWKPH_I5510XEZKP2_I5510XWKP1_HOME.tar.md5 and load it.
Wait a couple of seconds for it will checking out the md5 checksum for possible errors or incorrect.
5. Set the Galaxy 551 into "Download Mode" turn it OFF, then Press and hold the 'Q key and Power key" simultaneously. You will then see a downloading screen.
6. Connect the phone to PC , the ID:COM in Odin will turn to yellow if the device is already detected.
see the picture below. If Odin then recognize the phone, hit the "START" button to begin flashing.
DO NOT TOUCH or INTERRUPT the phone while the flashing is in progress. Wait until it completely finishes.
8. You will then see a word 'PASS" once its successfully finishes installing the firmware. The device will then reboot. Then unplug it from PC/laptop.
Do full factory reset, this is useful if you'll experience bootloops after flashing. Master reset by code *2767*3855# or via recovery mode pressing the "T key and Power key" will get you in recovery mode just scroll down to Wipe Data/Factory reset.
How to change to another CSC settings. This guide is originally created by skilledchaos, you can also visit his blog athttp://galaxy551.wordpress.com/ to learn more on how to tweak your Galaxy 551 like rooting installing CWM and other stuff.
1. Flash the file GT-I5510_CSC-xxxxxx.tar.md5 via Odin 4.xx
2. You may want to control the result of your flash by calling *#1234# and looking at line 3
3. Call *#06# to find out your device's IMEI and note it
4. Call *#272*IMEI# (instead of IMEI type the result of step 3)
5. Select your favourite language / area, e.g.:
CPW => English ~ UK (CPW) => QWERTY (with GBP pressing Alt+F)
DBT => German ~ Germany => QWERTZ (with EUR pressing Alt+F)
ITV => Italian ~ Italy => QWERTY (with GBP pressing Alt+F)
XEF => French ~ France => AZERTY (with EUR pressing Alt+F)
XEO => Polish ~ Poland => QWERTY (with GBP pressing Alt+F)
XEU => Engish ~ UK (Open) => QWERTY (with GBP pressing Alt+F)
NOTE: If you change the CSC settings, your device will be resetted! Therefore backup your personal data! Your microSD card's content will not be harmed.
6. Don't forget to control the language settings for Swype
7. You may delete all folders of languages you aren't interested in from the system partition (go to /system/csc) to free up valuable space
8. You may also delete T9 support for all languages you aren't interested in from the system partition (go to /system/T9DB) to free up valuable space
No comments:
Post a Comment